New Release Candidate Firmware Version - 0.5.1 For X2/X3/AM6 Families Available

Important!

0.5.1 firmware is a release candidate!  Soon it will be available via OTA when will turn into a stable version.

Changelog 16.05.2022 v.0.5.1

1. HDMI CEC fixes

2. Fixed resetting HDMI sound and passthrough settings after reboot

3. Fixed playback problems after boot if using Bluetooth audio

4. Fixed mpeg2 IPTV playback

5. Fixed rare problem with the wrong resolution after HDMI hotplug

6. Fixed problem with enabled Dolby Vision after boot (AM6)

Download links

AM6

https://mega.nz/folder/v9NFBaqI#hsuBozNKgldocm8LUsUsfQ

X2

https://mega.nz/folder/P1k0XaoI#LyFxCJZFHHzgTBy-Ry4p2w

X3

https://mega.nz/folder/fx0VUAQZ#yQrztMBEupTRjgpbQbtlHQ

Find us:

Facebook

Twitter

Youtube

Comment(S) (3)

• Comment by lostcause | 25.05.2022

  0.5.1. for AM6B Plus review: -issue 1.) Adaptive HDR doesent work, when is ON video quality during playback HDR videos is bad, colors are pale (washed out), however when Always HDR is ON everything works fine. 2.) In my case CEC works fine, but there is some strange behavior, when TV is off and box is in sleep mode if I turn on TV with IR button on Ugoos remote or regular TV remote (TV send CEC signal to box for power up) everything turn on just fine and works without issue, but If i press any another button on Ugoos remote (including red power button) when TV is off and box is in sleep state, everything will turn on however for some reason HDR is turn off according HW monitor (SDR report) until box restart or until I swich to adaptive and back to always HDR mode. It is very weird bug, in my opinion if box send CEC signal to TV for power on something went wrong with HDR, however if is opposite it is fine. 3.) This bug is even more weird, during the video playbak Youtube or Plex, if I press OK button on Ugoos remote control video will stop for couple second and after that will continue, very weird it is like video buffer is lost, but that is not happening all the time only If I dont use remote for 30 second or more during playback, so when I start video playback OK button on remote works just fine when I press it video bar show up, but when I leave video playback for 30 second or more without remote using, and when I press OK button again video will freeze for couple of second and continue. I try disable bluetooth and I use Ugoos remote in IR mode, and works fine. So something is wrong with OS when bluetooth remote control is in use, also I try antoher RF remote control also works fine. 4.) DTS passthrough doesent work for me in Plex, to be more specific it is work but video sttuter and sound is very delay, EAC3 works just fine. 5.) If refresh rate switching is ON in Plex every audio format during playback will be change to PCM so you loose benefits of AC od EAC3 because sound is flat and quiet, I dont know if this is a bug or technical limitation but it is present since 0.4.x firmware version. 6.) For some reason OS report less then 4 GB RAM, I dont know if that is issue or it have some specific purpose. These are bugs I managed to catch during one week of use, If I notice more bug I will report here also I hope some of that bug will be fix. Thanks

• Comment by lostcause | 03.06.2022

  UPDATE: I notice two more issue 1.) When turn on box from sleep sometime there is no sound, only fix is box restart. 2.) Also when turn on box from sleep sometime there is issue with bluetooth remote, it become slow, for example you press few times left or right button but android recognize only one press (input), fix is turn on/off bluetooth or box restart.

• Comment by Victor | 16.01.2023

  thanks for the great update!